The marinaflexx range is available in packaging units of 10 planks. This corresponds to 2,417m². One plank has the dimensions 1790x135x10mm

No, our planks have a standard size of 1790x135x10mm. We designed the planks to connect seamlessly in width and length, meaning any length or width can be easily achieved.

marinaflexx is a finished parquet. This means the floor is ready to be laid and can be walked on immediately. The gluing is waterproof and the floor is fully bonded to the subsurface. Please also take a look at our installation instructions .

No, laying marinalfexx is actually the perfect DIY project for anyone who is a little handy. Please also take a look at our installation instructions .

The planks have standard dimensions of: 1790x135x10mm. Unfortunately, we cannot currently offer individual made-to-measure products. The planks are designed in such a way that they can be cut very easily.

marinaflexx is a unique waterproof floor system. Thanks to its seamless workmanship and oiled surface, it is waterproof and therefore also suitable for wet and damp rooms.

The floorboards in the current portfolio are only intended for indoor use. We are currently planning to develop floorboards that can also be used outdoors. When the time comes, we will definitely inform you about it in our newsletter, on our website and on our social media channels.

The surfaces of the floorboards are sanded and oiled upon delivery. After installation, marinaflexx floorboards only need to be given maintenance care using PJ oil care. The normal cleaning and care application is then continued. For more information, see the care instructions .

The parquet floor may only be glued using plasticizer-free adhesives, such as 2-component PU parquet adhesive. Please also take a look at our assembly recommendations .

The subsurface must be checked according to the relevant standards to determine its readiness for covering parquet work. Depending on its condition, the surface must be pretreated in accordance with the adhesive manufacturer's instructions. (priming, filling, decoupling, moisture barriers, moisture sealing) The evenness of the substrate must be checked with a 100cm long measuring rod; the deviation may be a maximum of 2 mm in the gauge.

The wood used always comes from the same source, so they always look more or less the same. However, the appearance of a digital image always depends on the color quality and color settings of the screen. That's why we always recommend requesting a sample box before ordering so you can see the colors live at home.

Yes, you can order a custom sample box through our online store .

The samples are approximately 210x270mm in size

The number of planks required depends on the size of the respective room. We have developed a calculator for you that will help you with the calculation. Simply enter the required square meters and allow for a waste of around 10%. The calculator will then calculate the number of planks and packaging units required for you.

No, the planks can be easily cut with a sharp saw.